
Felt Rollers · Kevlar · PBO
3+7 PBO/Kevlar Felt Roller Sleeve
Rated to 600–650°C
Reference price: US$308–585 per m², EXW
A seamless PBO/Kevlar felt roller sleeve for the press exit and the rollers after the hot saw.
Up to 600°C, or 650°C with premium PBO. Made to your roller size.
PBO felt roller
PBO felt roller sleeves for the press exit and hot saw
The rollers nearest the press see the most heat, and leave the most marks.
This sleeve has a 3mm PBO face over 7mm of Kevlar, needled into one seamless tube.
It covers the run-out rollers at the press exit and the rollers right after the hot saw.

600°C
Maximum temperature
650°C
With premium PBO fibre
18–350mm
Inner diameter
R0–R3
Resin hardness grades
Specifications
PBO felt roller sleeve specifications
Every sleeve is made to your roller.
Tell us the inner diameter, length and hardness grade.
| Model number | Roller-PK |
|---|---|
| Type | Felt roller sleeve |
| Material | 3mm PBO + 7mm Kevlar |
| Colour | Brown / yellow |
| Temperature | 600°C max, 650°C with premium PBO |
| Density | 400 g/m²·mm |
| Thickness | 6–12mm |
| Inner diameter | 18–350mm |
| Hardness grade | R0 (no resin), R1 (soft), R2 (semi-rigid), R3 (rigid) |
| Position on line | Press exit and run-out table (about 8 pieces); after the hot saw (about 5 pieces) |
| Technique | Needle punched |
| Size | Made to order |
| Packing | Shrink film and carton |
| Brand | PD |
| Origin | Guangdong, China |

Why PBO
Why choose a PBO felt roller sleeve
01
Takes over from graphite
PBO sleeves replace graphite at the press exit, where graphite leaves scratches on the profile.
02
Rated to 600°C
Standard PBO works up to 600°C, and premium PBO reaches 650°C.
03
Seamless tube
The sleeve is needled as one tube, so there is no joint and the thickness stays even all the way round.

Application
Where PBO felt roller sleeves go
About 8 sleeves cover the press exit and the run-out table before the saw.
About 5 more go straight after the hot saw.
After those first positions, Kevlar sleeves take over.
Our factory
How we make PBO felt roller sleeves
01
PBO and Kevlar fibre
The working face is PBO fibre. The base is 100% Kevlar para-aramid.
PBO is the most heat-resistant fibre we use.
The Kevlar base carries the load, so the PBO face only has to take the heat.


02
Carding
Carding opens the fibre and combs out impurities and short lint.
We control temperature and humidity so the web stays even.
An even web is what keeps the finished felt the same thickness from edge to edge.
03
Web laying and needling
The web is cross-laid in layers to the weight you need.
Needle punching then locks the fibre onto the base cloth.
The barbed needles pull fibre through the layers, so the felt holds together without glue.


04
Resin treatment
Resin grades run from R0 (no resin) to R3 (rigid).
Resin adds wear resistance and stops aluminium swarf sticking to the felt.
Tell us how abrasive the position is and we will suggest the grade.
05
Cutting
Each sleeve is cut to your roller length.
Ends come out clean, with no loose fibre.
Send the roller length and we cut to it. There is no standard size.


06
Needle check
Every finished piece passes through a metal detector.
No broken needle leaves the factory inside the felt.
A broken needle tip left in the felt would mark your rollers or your product.
Quality
ISO 9001 certified felt factory
We work to an ISO 9001 quality system.
QC staff check the raw fibre and every production step.
Certificates are on file and we can send copies with your quote.
If you need a test report with an order, ask for it before production starts.


Packing
How PBO roller sleeves are packed
Sleeves are wrapped in clear film to keep them dry.
They then go into cartons for shipping.
Tell us if your forwarder needs different packing and we will pack to that.
Support
Help before and after you order
01
Made to your drawing
Send a drawing or the size of your old part. We make the new one to match.
02
The right felt for each position
Not sure which felt goes where? We match PBO, Kevlar, Nomex or polyester to each position on your line.
03
One source for your line
We also supply extrusion presses, ageing furnaces, dies and handling systems.
FAQ
PBO felt roller sleeve FAQ
What do you need to quote?
The roller diameter, the sleeve length and the hardness grade.
A photo of the run-out table helps. Add your delivery address for shipping.
When is premium PBO worth it?
Standard PBO covers work up to 600°C.
Choose the premium grade when the sleeve sees up to 650°C.
Which hardness grade should I choose?
R0 has no resin and is the softest. R3 is rigid.
Tell us the position and the profile type, and we suggest a grade.
Is it normal for a roller sleeve to turn black after a few days?
No. It usually means the roller is not turning and the sleeve is rubbing.
Check that the roller spins freely.
How does ordering work?
We send a quote and an invoice. Production starts when payment arrives.
The balance is paid before shipment.
Which payment methods do you accept?
T/T, PayPal, Western Union and L/C.
Ask us if you need another method.
PD FELT · Foshan, China
Need a custom 3+7 PBO/Kevlar Felt Roller Sleeve?
Tell us the machine, the position on the line and the temperature. We make the felt to your drawing.














