480°C
Products · PD FELT
Felt Pads & Strips
Needle-punched felt pads and strips, cut to size with resin hardness from R0 to R3.
From PBO-faced pads that replace graphite at the press exit to Kevlar and Nomex cooling bed slats and basket strips.
Also ironer padding for flatwork ironers and tension pads for steel coil slitting.
Products
Heat-Resistant Felt Pads & Strips
Every belt, sleeve, pad and blanket is made to your size. Open a product for its full specification.
260°C
100% Nomex Felt Pad
View product ↗
260°C
100% Nomex Felt Strip for Basket
View product ↗
240°C
100% Nomex Ironer Padding
View product ↗
160°C
100% Polyester Ironer Padding
View product ↗
600–650°C
3+7 PBO/Kevlar Felt Pad
View product ↗
160°C
Steel Slitting Machine – Felt Tension Pad
View product ↗Compare felt pads
Felt pads by heat and position
Pads and strips are cut to size from the same felt grades as our belts, with resin hardness from R0 to R3.
Material
PBO surface on a Kevlar base
100% Kevlar
100% Nomex
100% Nomex with a centre base fabric
Working temperature
600–650°C
480°C, max 500°C
260°C, max 280°C
260°C, max 280°C
Density
400 g/m²·mm
400 g/m²·mm
400 g/m²·mm
300 g/m²·mm
Thickness
10mm (3+7, 2+8, 4+6, 5+5)
6–10mm
6–10mm
6, 8, 10mm
Width
40–100mm
40–100mm
40, 60, 80, 100mm
30–40mm
Length
Up to 20m
Up to 20m
1–3m typical, up to 20m
1.75–2m U-strips or 500/700mm pieces
Position on the line
Press exit, replacing graphite; cooling table levels 1–2
Fixed or walking-beam cooling bed, levels 1–2
Walking-beam cooling bed, levels 3–4
Aging-furnace baskets and frames
Sizes are typical ranges. Every part is made to your drawing; send the size and the working temperature and we will confirm the specification.
10mm
Standard PBO/Kevlar pad
20m
Longest pad
R0–R3
Resin hardness grades
7
Pad products
Common applications
Where our felt pads work
01
Press exit
PBO/Kevlar pads that replace high-purity graphite where profiles leave the press.
02
Cooling beds
Kevlar and Nomex slats for fixed and walking-beam cooling beds.
03
Aging furnace baskets
Nomex strips that stop rack scratches on high-finish profiles.
04
Laundry & steel
Ironer padding for flatwork ironers and tension pads for coil slitting.
Not sure which product?
Need felt pads cut to size?
Send the part size, the working temperature and a photo of the old label. Our engineers will recommend the product and quote within one working day.